Filter
Top Products
Memory Scanning
Memory Scanning scans the frequencies you have preset
in the memory. (To preset a station in the memory, see
page 22). Choose one or more target pages to run Memory
Scanning.
1
Set the SQL control to MIN.
2
Press POWER to turn the receiver on.
3
Recall any preset channel (see “Recalling a preset
channel”, page 23).
The preset number will appear in the display.
4
Press SCAN.
The receiver will enter the Memory Scanning mode.
The page number(s) for the target page(s) will appear
in the display.
Here, the receiver is scanning page
1.
5
Adjust the SQL control (see page 11).
6
Select the target page.
With each press of the number key, the page number
will appear and disappear alternately in the display.
Here, you have pressed 2 and 6 (to add these pages),
and 1 (to discard the page). The receiver is currently
pausing scanning on preset channel number 12 of
page 6.
Notes
*The number for the current target page will flash in the display.
l When there is only one page in the display, you cannot discard
the page from the scanning target.
13