Sony ICF-SC1 Scanner User Manual


 
Manual Tuning
Tune in by adjusting the frequency step by step with the
+/-keys.
1
Set the SQL control to MIN.
2
Press POWER to turn the receiver on.
3
If you are in the Scanning Mode, press SCAN to enter
the Manual Mode.
B
will disappear from the display.
4
Tune in by pressing the +/- keys.
The
+
key will move the frequency up and the
-
key
will move the frequency down. One press will move
the frequency one step. Hold down the key to move
up or down continuously.
Note
*The changes you have made in frequency step or detection mode
are effective only in the current band. When you have entered a
different band while pressing the +/-keys, the frequency step
and detection mode will return to the default for that band (see
“Frequency range of the bands”, page
10).
*If you press + at 1300 MHz, the frequency display will change to
25 MHz. If you press-at 25 MHz, the frequency display will
change to 1300 MHz.
21