Filter
Top Products
Preset Tuning
The receiver has
10
preset pages, each with 30 channels;
thus the receiver can memorize a total of 300 frequencies,
Presetting stations in the memory
When you preset a frequency to a channel, the frequency
step, detection mode and the DELAY setting for each
frequency is memorized as well.
1
Press POWER to turn the receiver on.
2T
une in to the frequency you wish to preset.
3
If you are in the Scanning Mode, turn SQL to MIN to
pause scanning, or press SCAN to enter the Manual
Mode.
You cannot preset a station when the receiver is
scanning.
4
Preset th
e
f
choice.
requency to the preset channel of your
While holding down ENTER, press the number key
for the page of your choice, then EXE, then the
number key for the preset channel number of your
choice, then EXE. Do not release ENTER until you
have completed presetting.
Example: presetting 128.000 MHz to preset channel 26
of page 5.
Hold down ENTER...
The current page number will flash in the
display.
. ..press 5, then EXE (without releasing ENTER)
...
PAGE
Em
DELAY
AM
Page 5 has been entered and the preset channel
number will flash in the display.
..then
press 2, then 6 (without releasing ENTER)...
“PRESET 26” will flash in the display