Key protection
Press
LIGHT/*
for 1 second or longer.
“h”
will light
in the display and all keystrokes will be neutralized.
Use this feature to avoid operation by inadvertent
keystrokes.
To cancel key protection
Press
LIGHT/h
again for 1 second or longer.
Turning on the light
Press
LIGHT/h
lightly (less than 1 second).
The light in the display window will light for about 10
seconds.
If you press any operation button while the light is on, the
light will be lit for another 10 seconds.
To turn off the light
Press
LIGHT/h
again.
Notes
-The light is lit continuously when the receiver is run on external
power
(i.e.,
AC
power adaptor or
the
car battery cord).
To turn off the light, press LIGHT/b. Press again to turn the
light on again.
*Pressing LIGHT/b will not light the window while the power
is turned off.
Turning off the beep
You can turn the beep sound off.
1
Ifth
e
power is on, press POWER to turn off power.
2
Press POWER while holding down EXE.
“bP off” will be displayed before the power turns on.
To turn on the beep again
Repeat the above.
“bP on” will be displayed before the power turns on.
32