Sony MKS-2015 Switch User Manual


 
Chapter 4 Basics of Video Switching
47Basic Operations (2): Video Switching on the PGM/PST Bank — For 1.5 M/E Systems
Basic Operations (2): Video Switching on the PGM/
PST Bank — For 1.5 M/E Systems
If you are using a 1.5 M/E panel or a 1.5 M/E wide panel, you can create the
program video (final output video) on the PGM/PST bank. You can select
background video and execute transitions with the same operations as the ones
used on the M/E bank. You can also take video created on the M/E bank and use
it as background video.
This section shows how to take the output of the M/E bank (for example, the lion
video selected with the 3rd cross-point button from the left) and use it as
background video. To replace it, we will use the castle video selected with the
4th cross-point button from the left. As the wipe pattern, we will use pattern
number 0001, in which the new video gradually moves in from the left side of
the screen.
Preparations for operation
Before starting, move the fader lever in the PGM/PST transition control block
from one end of its range to the other, and stop it at the top position.
After finishing the above preparations, proceed as follows.
Transition start Transition end
12 453
1.5 M/E panel