Filter
Top Products
Chapter 5 Basic Operations
65Changing the Position and Size of Effect Patterns
2
Press [Position], turning it on.
3
For a 2-channel effect, select the channel or channels for which you want to
make settings. (See “To select channels from menus” (page 61).)
(You can set the parameters for the individual channels.)
4
Set the following parameters with the knobs.
a) –100.00 moves the center of the pattern to the left edge, and +100.00 moves it to the right edge.
b) –100.00 moves the center of the pattern to the bottom edge, and +100.00 moves it to the top edge.
c) Not available for some patterns. For details, refer to “Effect Pattern Transformations and
Modifications” in the Appendix (separate document).
To return the pattern to the center of the screen in a transition
(effect pattern nos. 0001 to 0999 only)
In the Effect/Wipe >M/E Effect >Main menu, press [Auto Center], turning it on.
Knob Description Setting values
1 (H Position) Horizontal position
–200.00 to +200.00
a)
2 (V Position) Vertical position
–200.00 to +200.00
b)
3 (Size)
c)
Effect pattern size 0.00 to 200.00