Filter
Top Products
3-52
SYSTEM SETTINGS
WEB PAGE (ADMINISTRATOR)
Operation Settings
Settings related to machine operation can be configured. Select [System Settings] - [Operation Settings] from the menu
bar and configure each setting.
Keys Touch Sound
This setting is used to adjust (or turn off) the volume of the
beep that sounds when you select a key.
Auto Clear Setting
The time until Auto Clear activates can be set to any
number of minutes from 10 to 240.
If the machine is not used for the duration of time set
here, the auto clear function will clear any settings that
have been selected and return the screen to the base
screen of the job status screen.
Cancel Auto Clear Timer
This is used to disable the auto clear function.
Message Time Setting
The duration of time that messages appear in the display
(the time until a message is automatically cleared) can
be set to any number of seconds from 1 to 12.
Machine Display Language Setting
The language that appears in the display can be changed.
Disabling of Job Priority Operation
This disables the job priority function and hides the
[Priority] key in the job status screen.
Disabling of Bypass Printing
This is used to disable bypass printing (printing other
jobs ahead of a job that has been stopped* because the
paper required for the job is not in any of the trays).
* This does not include cases where the paper ran out
during the job.
Key Operation Setting
This setting determines how long a key in the display
must be selected until the key input is registered. The
time can be set from 0 to 2 seconds in increments of 0.5
seconds.
By lengthening the time setting, key input can be
prevented when a key is selected accidentally. Keep in
mind, however, that when a longer setting is selected
more care is required when selecting keys to ensure that
key input is registered.
Disable Auto Key Repeat
This is used to disable key repeat.
Key repeat causes a setting to change continuously
while a key is selected, not only each time the key is
selected.
Disabling of Clock Adjustment
This setting is used to prohibit changing of the date and
time.
Machine Display Pattern Setting
One of the six color patterns can be selected for the
color pattern in the display.
A sample of the selected pattern can be viewed.
When user authentication is enabled and a display
language is specified in the favorite operation group,
that setting is given priority.