Filter
Top Products
1-36
BEFORE USING THE MACHINE
DEVICE CLONING
Device cloning is used to save the machine's setting information in XML format and copy the information to another
machine.
This function saves you the trouble of repeatedly configuring the same settings in multiple machines. Select [Device
Cloning] in the Web page menu and configure the settings.
EXPORT SETTINGS
Use these settings to back up data to your computer.
IMPORT SETTINGS
Use these settings to restore data that was previously backed up to your computer to the machine.
• The data is saved to the computer that is accessing the Web page.
• This function cannot be used while the system settings are in use, while a job is being executed, or when there is a
reserved job.
• For machines for which data can be imported, contact your dealer or nearest SHARP Service Department.
• The following data is not copied when device cloning is performed:
- List print.
- Count and device status display items.
- IP address of the machine, device name, administrator password and other information that is specific to the machine.
- Screen contrast and other adjusted values particular to each hardware device.
Item Settings
Export Settings Type Select the type of settings that you want to export.
Password Enter the password that will be required to import settings (maximum of 16
characters).
Item Settings
Import settings from file Enter the name of the file to be imported (maximum of 200 characters). Click
[Browse] to select the file from the file selection dialog box.
Password If a password has been set for the file to be imported, enter the password (maximum
of 16 characters).