Sony VPL-W400QM Projector User Manual


 
10 (EN)
1 MAIN POWER switch (OON/oOFF)
Turns the main power on and off.
2 AC IN socket
Connect the supplied AC Power cord.
Note
If the supplied AC power cord plug does not match the
wall socket in your country, consult qualified Sony
personnel.
3 Ventilation holes (exhaust)
4 Ventilation holes (intake)
Notes
Do not place anything near the ventilation holes as it
may cause internal heat build-up.
Do not place your hand or objects near the
ventilation holes —the air coming out is hot.
Rear
Location and Function of Controls
5 Rear remote control detector
6 AUDIO OUT L/R jacks (phono type)
Connects to external active speakers.
The volume of the speakers can be controlled by the
VOLUME keys on the projector or the Remote
Commander.
7 CONTROL S IN/OUT jack (stereo minijack)
Connect to the CONTROL S connectors of other Sony
equipment. It is then possible to control the whole
system with a single Remote Commander.
8 TRIG (trigger) connector (minijack)
Outputs the ON or OFF condition of the unit to the
external equipment.
When the unit is turned off, 0 V is output and when the
unit is turned on, 5 V is output. However, as the power
is not output, you cannot use the connector as the
power source.
1
2
3
5
8
7
6
4