Filter
Top Products
28 (EN)
INPUT-A
H POLARITY:NORMAL
V POLARITY AUTO
HALF TONE: NTSC3.58
IR RECEIVE PAL
POWER SAVI SECAM
PATTERN NTSC4.43
COLOR SYS: PAL.M
INPUT
SELECT
MEMORY
SELECT
ASPECT
SELECT
SET
SETTING
INPUT
INFO.
SEL: SET: ENTER RESET:
EXIT:MENU
RESET
INPUT-A
H POLARITY:NORMAL
V POLARITY:NORMAL
HALF TONE:ON
POWER SAVING:OFF
SIRCS RECEIVER:
FRONT&REAR
PATTERN
COLOR SYS:AUTO
INPUT
SELECT
MEMORY
SELECT
ASPECT
SELECT
SET
SETTING
INPUT
INFO.
SEL: SET: ENTER RESET:
EXIT:MENU
RESET
INPUT-A
H POLARITY:NORMAL
V POLARITY:NORMAL
HALF TONE:ON
POWER SAVING:OFF
SIRCS RECEIVER:
FRONT&REAR
PATTERN FRONT
COLOR SY REAR
INPUT
SELECT
MEMORY
SELECT
ASPECT
SELECT
SET
SETTING
INPUT
INFO.
SEL: SET: ENTER RESET:
EXIT:MENU
RESET
INPUT-A
H POLARITY:NORMAL
V POLARITY:NORMAL
HALF TONE:ON
POWER SAVING: ON
SIRCS RECEIVE OFF
FRONT&REAR
PATTERN
COLOR SYS:AUTO
INPUT
SELECT
MEMORY
SELECT
ASPECT
SELECT
SET
SETTING
INPUT
INFO.
SEL: SET: ENTER RESET:
EXIT:MENU
RESET
INPUT-A
H POLARITY:NORMAL
V POLARITY:NORMAL
HALF TONE: ON
POWER SAVI OFFFF
SIRCS RECEIVER:
FRONT&REAR
PATTERN
COLOR SYS:AUTO
INPUT
SELECT
MEMORY
SELECT
ASPECT
SELECT
SET
SETTING
INPUT
INFO.
SEL: SET: ENTER RESET:
EXIT:MENU
RESET
INPUT-A
H POLARITY:NORMAL
V POLARITY: NORMAL
HALF TONE:O REVERSE
POWER SAVING:OFF
SIRCS RECEIVER:
FRONT&REAR
PATTERN
COLOR SYS:AUTO
INPUT
SELECT
MEMORY
SELECT
ASPECT
SELECT
SET
SETTING
INPUT
INFO.
SEL: SET: ENTER RESET:
EXIT:MENU
RESET
H (Horizontal) POLARITY
Set to REVERSE to reverse the horizontal orientation
of the picture.
V (vertical) POLARITY
Set to REVERSE to reverse the vertical orientation of
the picture.
HALF TONE
Set to ON to reduce the luminance of the menu
background.
POWER SAVING
When set to ON, the projector goes into the power
saving mode if no signal is input for 10 minutes. The
power saving mode is canceled when a signal is input
or whenever a key is pressed.
SIRCS RECEIVER
Selects the remote control detectors on the front and
rear of the projector.
FRONT & REAR: Activates both the front and rear
detectors.
FRONT: Activates the front detector only.
REAR: Activates the rear detector only.
PATTERN
Press the b or the ENTER key to display the “H” test
pattern. Press the B or the ENTER key to clear the
pattern. The pattern disappears automatically if no key
is pressed for one minute.
COLOR SYS (system)
Selects the color system of the input signal.
Normally, set to AUTO.
If the picture is distorted or colorless, select the color
system according to the input signal.
The following item cannot be adjusted
depending on the types of input signal
Item Cannot be adjusted with
INPUT-A Signal input from VIDEO IN connectors
COLOR SYS Signal input from INPUT-A connectors
The SET SETTING Menu
INPUT-A
H POLARITY: NORMAL
V POLARITY: REVERSE
HALF TONE:ON
POWER SAVING:OFF
SIRCS RECEIVER:
FRONT&REAR
PATTERN
COLOR SYS:AUTO
INPUT
SELECT
MEMORY
SELECT
ASPECT
SELECT
SET
SETTING
INPUT
INFO.
SEL: SET: ENTER RESET:
EXIT:MENU
RESET