Filter
Top Products
32 (EN)
HDVS
S VIDEO VIDEO
L (MONO) R
LR
VIDEO IN
INPUT-A
AUDIO IN
VIDEO IN AUDIO IN
R/R-Y/PR G/Y B/B-Y/PB C.SYNC
For details on how to conncet a VCR or external active
speakers, see page 14. Also refer to the instruction
manual of the equipment to be connected.
When making connections, be sure to:
•Before connecting any cables, make sure that each
piece of equipment to be connected is turned off.
•Use cables appropriate for the equipment to be
connected.
•A loose connection may cause hum or noise.
•When disconnecting a cable, pull it out from the plug;
not the cable itself.
Connection Example
Connecting a BNC connector:
Connecting 15k RGB/Component Equipment
AC power cord
(supplied)
to a wall outlet to AC IN
to RGB/component output
15k RGB/component equipment
Front
Connecting cable (not supplied)
Notes
• This unit cannot accept separate sync signal with 15k
RGB/component input signal. Use composite sync
(negative) or Sync on Green.
• Select the RGB, COMPONENT, HDTV signal
1)
with
the INPUT-A item on the SET SETTING menu.
2 Twist to the right.
1 Align the pins with the pin holes and
push in the plug into the socket.
..........................................................................................................................................................................................................
1) The picture may not be correctly displayed when an HDTV signal with external sync signal is input. To view the
HDTV signal, input the G signal with the sync signal or Y signal with the sycn signal, to the INPUT-A G/Y connector.
Do not connect the external sync signal to the INPUT-A C. SYNC connector.