Sony VPL-W400QM Projector User Manual


 
22 (EN)
The MEMORY SELECT menu is used for adjusting
the picture. Items which can be adjusted are displayed
in green.
Operation
When changing the adjustment level:
1. Select an item.
Use the V or the v key on the control panel to select an
item, then press the b or the ENTER key.
On the Remote Commander, move the joy stick up or
down to select an item, then move it to the right or
press the ENTER key.
The selected item is dislayed at the bottom.
2. Change the adjustment level.
To increase the number, press the V or the b key.
On the Remote Commander, move the joy stick up or
to the right.
To decrease the number, press the v or the B key.
On the Remote Commander, move the joy stick down
or to the left.
Adjustable range is MIN, 1, 2, … 98, 99, MAX.
3. Press the ENTER key to restore the original
screen.
The original screen is restored.
CONTRAST: 80
When changing the setting:
1. Select an item.
Use the V or the v key on the control panel to select an
item, then press the b or the ENTER key.
On the Remote Commander, move the joy stick up or
down to select an item, then move it to the right or
press the ENTER key.
The pop-up menu for the selected item appears.
2. Change the setting.
Press the V or the v key on the control panel.
On the Remote Commander, move the joy stick up or
down.
3. Press the ENTER or the B key on the
control panel to restore the original screen.
On the Remote Commander, press the ENTER key or
move the joy stick to the left.
VIDE
O
MEMORY:1
CONTRAST 8
0
BRIGHT 5
0
COLOR 5
0
HUE 5
0
SHARP 5
0
D.PICTURE:OFF
COLOR TEMP:LOW
INPUT
SELECT
MEMORY
SELECT
ASPECT
SELECT
SET
SETTING
INPUT
INFO.
EXIT: MENU
SEL:
The MEMORY SELECT Menu
INPUT
SELECT
MEMORY
SELECT
ASPECT
SELECT
SET
SETTING
INPUT
INFO.
SEL:
EXIT: MENU
SET: ENTER RESET: RESET
VIDEO
MEMORY: 1
CONTRAS 2 80
BRIGHT 3 50
COLOR 4 50
HUE 5 50
SHARP 50
D.PICTURE:OFF
COLOR TEMP:LOW