Filter
Top Products
16 (GB)
Connecting the Projector
On the USB function
When connecting the projector to a computer using
the USB cable for the first time, the computer
recognizes the following devices automatically.
1 USB hub (general use)
2 USB human interface device (wireless mouse
function)
3 USB human interface device (projector control
function)
Recommended operating environment
When you use the USB function, connect your
computer as illustrated in the box on the left.
This application software and the USB function can
be used on a computer loaded with Windows 98,
Windows 98 SE, Windows 2000 or Windows XP.
Notes
• The projector recognizes the USB mouse when the
computer is connected to the USB connector.
• Your computer may not start correctly when
connected to the projector via the USB cable. In this
case, disconnect the USB cable, restart the computer,
then connect the computer to the projector using the
USB cable.
• This projector is not guaranteed for suspend or
standby mode. When you use the projector in
suspend or standby mode, disconnect the projector
from the USB port on the computer.
• Operations are not guaranteed for all the
recommended computer environments.
To connect an IBM
1)
PC/AT
1)
compatible
computer
When you use a USB mouse
OUTPUT REMOTE VIDEO IN
INPUT B INPUT A
AUDIOUSB RGB
AUDIO
VIDEO
S VIDEO
~
AC IN
AUDIO
AUDIO
RGB
MONITOR RS-232C
USB cable
A type – B
type
(supplied)
Left side
HD D-sub 15-pin
cable (supplied)
Stereo
audio
connecting
cable
a)
(not
supplied)
to monitor
output
to audio
output
to USB
connector
.........................................................................................................................................................................................................
1) IBM
®
and PC/AT are a trademark and a registered trademark of International Business Machines Corporation, U.S.A.
2) Macintosh is a registered trademark of Apple Computer, Inc.
Computer
To connect a Macintosh
2)
computer
When connecting a video output connector that has a
two-line pin configuration, use the appropriate adaptor
for that type of connector (not supplied). If your
Macintosh supports a USB function, you can use the
wireless mouse function by connecting a USB cable.
a) Use a cable with no resistance.