Sprint Nextel MAX-206M2 Modem User Manual


 
22 Alternate Method: Install Without the Modem Setup Assistant
3.
Plug in the modem and connect it to your computer.
Insert the round end of the power adapter into the modem’s power port and plug
the other end into a power source. (The Power LED should illuminate.)
Insert one end of the supplied Ethernet cable to your computer and the other
end into the yellow
LAN 1 port. (The LAN 1 LED should illuminate.)
4. Check the modem’s indicator lights to confirm your WiMAX signal. It may take a
few moments for the signal to find your modem.
If the WiMAX Signal indicator is solid green, the modem is receiving a WiMAX
signal. Proceed to step 5.
If the WiMAX Signal indicator is blinking, try moving the modem to a different
location (nearer a window or away from other electronics). Wait several seconds at
each location to see if you’re getting a signal.
If you cannot acquire a WiMAX signal, call XOHM Care at 877-333-XOHM (9646).
Tip
For more information about signal strength, see “XOHM WiMAX Signal Strength” on
page20.
WiMAX
Signal
LAN 1 Power