Filter
Top Products
1 General Information
________________________________________________________________________________________________________________________________________________________________________________________________________________________
16 Product Manual Type: 637f 07-02-10-01-E-V0505.doc
1.3 Range Data
1.3.1 Insulation Concept
COM1
COM2
Remote IN
X10
analog
X10
digital
X40
X30
dep. Optionsmodule
M1, M2, M3
DC-bus
brak - cirquit
L1, L2, L3
Us DC 24 V
power supply
DC 24 V
PE
L1
N
AC
power - terminals
double insulation VDE 0160
Insulation of control voltage supply
Required for safe separation (PELV): double insulation
Take Care ! The insulation of control (Com1..X40) depends on the insulation of control voltage supply
Additional insulation via opto-coupler or relay (without Safety-Functions)
customer part
1)
1)
see additional hints, chapter 2.4.2
GND
1.3.2 General Data
Enclosure Rating -
for Mounting in a Cubicle
IP20
Operating Temperature Range EN 50178 / VDE 0160, class 3K3
Storage Temperature Range -25°...+55° C
Air Pressure 86 kPa - 106 kPa
Humidity 5% - 85%, 40°C
Operating Temp 0...40°C
Reduced Operation
De-rating of the Output Current
1)
>40°...< 50°C
2% /°C
Altitude h
h ≤ 1000m
Reduced Operation
De-rating of the Output Current
1)
h > 1000...≤ 4000m
1% / 100m
Safety Over Voltage - Category of Power Circuit EN 50178 / VDE 0160, UL, cUL III,
Pollution Degree - for Mounting in a Cubicle VDE / UL: 2
Vibration Test in Accordance with
DIN IEC 68-2-6, Test FC
Condition for Testing
Frequency Range
Amplitude
Acceleration
Test Time per Axis
Frequency Sweep Speed
10...57Hz 57...150Hz
0,075 mm
1g
10 sweep cycle
1 octave/min
1)
Use only fan-cooled devices. For reduced operating
conditions, no UL approval is available.