Star Micronics LC-8021 Printer User Manual


 
10
Printer Setup
Securely attach the power cord to the power terminal on the back of the
printer.
Plug the other end of the power cord into a grounded wall outlet.
Caution!
If the voltage marked on the bottom of your printer does not match the voltage
from the outlet you are using, do not plug in the power cord. Contact your
dealer for assistance.
Use the printer’s power switch to turn power on (|) to turn power on and
OFF (O).
Note:
We recommend that you unplug the printer from the power outlet whenever you
do not plan to use it for long periods. Because of the this, you should locate the
printer so that the power outlet it is plugged into is nearby and easy to access.
Loading paper
This section tells you how to load cut-sheet paper. Note that you can also use
passbook. For details on using passbook, see “Paper Handling” on page 35 of
this manual.
Check that the control panel’s POWER indicator is flashing, which shows
that there is no paper in the printer.
When printing on 4-ply or 5-ply paper, the Multi-Part Mode should be
used. Check to make sure that the control panel’s
MULTI-PART
indicator
is lit. If it isn’t, press the control panel’s
MULTI-PART
button.