Filter
Top Products
Selecting a switch
21
Selecting a switch
❏
While in the EDS Mode (EDS-1 or EDS-2), use the control panel’s
EJECT
button to select a bank switch. While the
DATA
indicator is off, the lit
indicator indicates the currently selected switch.
Changing a switch setting
❏
After selecting a bank and switch, press the control panel’s
LF
button to
turn the switch on and off. The current setting of the switch is shown by the
POWER
indicator: the indicator is lit when the switch is on, and is not lit
when the switch is off.
Printing the current switch settings
❏
In the EDS Mode, hold down the control panel’s
ON LINE
button, and then
press the
LF
button to print the current EDS settings. Asterisks on the
printout show whether a switch is turned on or off.
Exiting the EDS Mode
❏
To save EDS settings you have made and exit the EDS Mode, press the
ON
LINE
.
Lit Indicator Selected Switch
MULTI-PART 1
MULTI-PART + EJECT 2
EJECT 3
EJECT + LF 4
LF 5
LF + ON LINE 6