Filter
Top Products
23
1. Plug in the printer (don’t turn it on yet).
2. While holding the TOF key and the Paper Feed key, turn
on the power switch.
When you want to cancel this mode, turn off the power
switch.
During normal operation -
Top of foms”-Ti j 1
**
* *
**
**
*
*
I
I I
**: Hold down
II Right margin set
I
*: Press
(Left margin set
J
Figure 2-13.
You can set many functions by the combinations of
the control panel keys while in the Off Line mode.
n Setting print start position
When you want to align the print start position, you can set it
by the micro-feed operation with the control panel, instead of
turning the platen knob manually.
1. Set the Off Line mode by pressing the On Line key.
2. While holding down the On Line key, press one of the
following keys.
Paper Feed key-Forward micro-feed
TOF key-Reverse micro-feed
3. When you can set the print start position, release the
Paper Feed key or the TOF key first, then release the On
Line key.
n Setting the top of form
When you turn on the printer, the top of form is automatically
set to the current position. If you want to change the position,