Star Micronics NX-10 Printer User Manual


 
When you run this program, you will get like this:
n The optional sheet feeder
The automatic sheet feeder is a handy option that feeds single
cut sheets automatically. Work done on cut sheets looks better
that done on computer paper, and you don’t have to tear the
“ears” off each sheet as you must with fan-fold paper.
The automatic sheet feeder feeds a new sheet automatically
every time the printer receives or generates a form feed. Any
time you wish, you can turn the auto-feed unit on and off by
using control codes.
Table 5-8
Automatic sheet feeder commands
When the automatic sheet feeder is installed, you must set the
DIP switch 1-5 on to detect the paper-out condition.
In addition, following functions are ignored when the auto-
matic sheet feeder is installed:
Setting of the page length
Top and bottom margins
Vertical tab settings
n The macro control code
The last of our group of miscellaneous codes is definitely not
the least. It is a user-defined control code, called a macro control
code. The term macro is from the jargonese macro-instruction