Filter
Top Products
SVx41HDI Series Server Remote Control: Instruction Guide
11
• The unit will sometimes reboot as part of the upgrade procedure, depending
on which system component is upgraded. You will have to reconnect and re-
login in those cases.
• Wait at least two minutes after pressing Start. Do not assume the upload did
not work. There is no status indicator bar to show the progress of the upload.
The upload could simply be slow.
• Each file that is distributed upgrades a different component of the system.
Therefore, be sure to apply all files you are given as part of an upgrade. The
system knows what to do with each file you give it, and they are checked for
validity before being applied.
Software Options Upgrade
Certain firmware features may be offered separately from the base unit, in order to reduce
the initial cost for the Server Remote Control.
NOTE: If you wish to upgrade after the system is in operation, go to the Manage
Firmware page and scroll down to the section entitled Purchase Options.
Look for a unique code, like the following one:
4-C80C-B960-1-0
If you provide this code to the technical support department, they can give you an unlock
code that will open any feature you request. Types in the code provided, exactly, into the
area provided and click “Submit”. The new features opened by the code will be enabled
immediately, but you may need to reboot the unit to begin using certain features.
Status Screen
This screen displays a system security log, various system settings, and the ability to generate a
copy of the system configuration in plain text format.
Port Numbers
This table allows you to change TCP port values for services available on the unit. By default,
they are factory-set to common Internet values. You may wish to enhance security by disabling
services that you will not
use with the unit. To disable
a service, change its port
number to 0. When you
have made any necessary
changes, click Commit
Changes to use the settings
the next time the unit
restarts. To force the unit to
restart immediately, click
Restart Servers.