Filter
Top Products
SVx41HDI Series Server Remote Control: Instruction Guide
5
Remote Control, you can use any typical communication software package (UNIX: tip, cu,
kermit, minicom; Windows: HyperTerminal, kermit).
Using the DB9 female-to-female null-modem serial cable (provided) connect one end of the
cable to the SERIAL port on the rear panel of the SVx41HDI. Connect the opposite end to the
serial port on the computer you are using to configure the unit. Configure the terminal software
with “8N1” settings:
Connection speed: 115200 bps
No. of bits: 8
Parity: None
Stop bits: 1
Flow Control: None