Filter
Top Products
SVx41HDI Series Server Remote Control: Instruction Guide
39
Activating the IPMI Option
A system without the IPMI option enabled
The SVx41HDI contains the necessary software to use IPMI. To enable this capability, you
must purchase the software option from StarTech.com unless you have purchased a model with
the feature pre-enabled. To verify whether the IPMI feature is enabled on your unit, login to the
Web interface as Admin, click the Setup/Admin button at the top of the page, and click
Firmware and flash memory management. If IPMI is not listed beside Software Options
(see above) then the IPMI option is not present and you will have to purchase the software option
to use the feature.
To purchase the IPMI option, contact StarTech.com Technical Support:
USA/Canada: 1-800-265-1844
UK/Ireland/Europe: 00-800-7827-8324
Rest of the World: +1-519-455-9675
Have your model and serial number on hand. When asked, supply the technician with the code
listed under Purchase Options at the bottom of the Firmware and flash memory management
page. Once the order is processed, the technician will provide you with an Unlock code. Enter
that code in the space provided, and click Submit. The system will update itself to allow IPMI
configuration.