Filter
Top Products
SVx41HDI Series Server Remote Control: Instruction Guide
28
NOTE: The Scan Type setting will determine whether computers must be eye-marked to be
included in the scan. See page 25 for details.
Scan Rate
Scan Rate sets the duration between switching to the next computer in Auto Scan mode:
left Ctrl + left Ctrl + F3
The unit switches between scan intervals of 3, 8, 15 and 30 seconds.
Keyboard Typematic Rate
You can adjust the keyboard typematic rate (given in characters/sec). This setting over-rides the
keyboard typematic rate of your BIOS and any operating system.
left Ctrl + left Ctrl + F4
The unit switches between rates of 10, 15, 20 and 30 characters/sec.
Audio Stick
A multimedia module can be LINKed to the back of the master KVM for selecting microphone
and stereo speaker signals. There are two options for Audio Stick: On and Off. When set to On,
audio selection follows computer selection. When set to Off, audio selection stops following
computer selection. It is useful if you want to listen to a particular computer's audio signal while
operating other computers.
left Ctrl + left Ctrl + F5
(Note: This is an optional feature requiring a separate device to be connected to the master
switch.)
Changing Your Configuration
After the initial power up, any device (either a KVM or a PC) can be added or removed from any
PC x port on the KVM without having to power down the Master KVM Switch. Make sure that
devices are turned offer before connecting them to the Master KVM switch.
Note: After changing your configuration, the OSD will automatically update to reflect the new
configuration.