Filter
Top Products
Instruction Manual
33
Bribar Feature
Along the bottom of the VNC screen is a dark blue bar with various but-
tons known as the Bribar. Its purpose is to show a number of critical sta-
tus values and to provide shortcuts to commonly used features. Here is a
snapshot of what it may look like. There will be slight differences based on
optional features and system configuration. Starting from the left side of
the Bribar, each feature and its function is outlined below.
Bandwidth: Indicates current average bandwidth coming out of the
Server Remote Control unit. The second number measures round trip
time (RTT) of the connection when it was first established.
Resync: Re-aligns the remote and local mouse points so they are on top
of each other.
Redraw: Redraws the entire screen contents; occurs immediately.
÷4, ÷8: Switches to thumbnail mode, at indicated size (i.e. 1/4,1/8 )
Ctrl-Alt-Del: Sends this key sequence to the host.Works immediately.
Alt-F4: Sends the key sequence to host (closes windows).
KVM: Sends the KVM “hotkey” sequence. This function is only enabled
when you have configured the unit to expect a particular brand of KVM
downstream. It sends the key sequence to launch the KVM’s on-screen
display (OSD) menu. This button is only present when a KVM model is
selected in the Web interface.
Menu: Shows the main menu.
Video: Shows the video-tuning menu where the picture quality can be
adjusted.
Keys: Shows the VirtKeys menu, which allows you to simulate pressing
special keys such as the Windows key or complex multi-key sequences.
[1][A][S]: These flags show the state of the keyboard lights, NumLock,
ShiftLock and ScrollLock respectively.