Filter
Top Products
Instruction Manual
56
You can make as many changes as needed on this menu at one time,
before applying your changes. Once you are satisfied with the changes
you have made, click Commit changes to apply the new settings. Click
Refresh at any time to see an updated list of attached R-Port modules.
Advanced Conguration Using the Integrated SSH Shell
In most cases, configuring the SV441DUSBI to the same settings as the
R-Port devices you are connecting should allow the devices to work with
a minimum amount of configuration. However, you can also change the
default settings on each R-Port device to fit your preferences and the
needs of your application.
If you click the Connect… button next to the device you want to con-
figure, two new windows will appear. The smaller of the two is a login
screen; the other is an SSH terminal window. Click the login window and
sign in as admin (using the same password as the Web interface) to
activate the terminal window. You will see a welcome banner similar to the
following:
Baud rate: 115200 bps, 8N1
Connected to #1: (none)... (Press Ctrl-Shift-_ for menu).
You are now connected to the R-Port module in a live terminal session.
Commands you type will be echoed on the terminal screen. The module
also offers a simple menu system that allows you to change its configura-
tion settings (similar to the function of the menus in a terminal software
package). Press [Ctrl] - [Shift] – [ _ ] (underscore) on the keyboard to
access the menu. It will be similar to the following:
RS-232 Menu (#1: (none), 115200 bps, 8N1)
Q – Disconnect
# - Send break
H – Hangup line (drop DCD)
E – Send Ctrl-Shift-_