Filter
Top Products
Instruction Manual
57
L – Low log entries (line buffer)
1 – Show last 10 log entries
other – Return to connection
Press key ->
To execute the desired command, simply press the corresponding key on
the keyboard. You can also execute the command and avoid the menu by
pressing the [Ctrl] – [Shift] – [ _ ] key combination quickly and pressing
the letter of the command. To quit the menu, press [Q] on the keyboard
when the menu is active. These commands are not sent to the device you
are managing and relate to the RPORT module itself.
Remote Login via SSH
You can also use a standard SSH client to access the R-Port options if
you wish to avoid using the Java-based SSH client in the Web interface.
Simply use your SSH client (several freeware packages are available for
download, along with commercial applications) and connect to the IP ad-
dress of the SV441DUSBI using port 22 (default).
Log in to the SSH session as admin using the same password as the
Web interface. At the command prompt type connect x (where x is the
number of the R-Port devices you wish to manage). Alternatively, you can
enter the command connect -l to see a list of active devices.
Operating Notes
If the power supply to the R-Port modules you have connected be •
comes faulty (short, overload) then the R-Port LED on the front panel
of the SV441DUSBI will show red. Under normal operations, this light
should remain green. The R-Port connector on the rear panel also has
an LED that mirrors the status of the light on the front panel.