Filter
Top Products
Instruction Manual
58
Hardware handshaking (CTS/RTS) is required for speeds exceeding •
9600 bps. It is enabled by default on the SV441DUSBI, but may need
to be enabled on the other end of the connection. For Unix systems,
the command is:
stty –crtscts < /dev/[serial port]
A maximum of four users may simultaneously login to the same •
module. All users may type commands at any time, and all users will
see the same output. Note the following:
All users have equal access to all channels.•
A maximum of 16 R-Port modules may be connected at any one •
time.
You plug-in and unplug any R-Port module at any time. When •
reconnected, it will automatically become available after a 15
second initialization period. Any log entries will be retained by the
R-Port module while deactivated, but will not be available to users
until it is re-initialized.
About Security Certicate Warnings
What is a security certificate?
Sites that employ secure TCP/IP (Internet) connections include a cer-
tificate that confirms that users are connecting to a legitimate site and
are not being redirected without their knowledge. Certificates are issued
by trusted third parties called Certificate Authorities (CAs) and contain
essential details about a site that must match the information supplied to
your Web browser.
Why do I receive a warning when I access the login screen on the
SV441DUSBI?
As it redirects you to a secure (SSL) session by default, the login screen
may generate a warning from your Web browser or the VNC Java client
for two different reasons. First, the CA that has issued the certificate on
StarTech.com’s behalf may not yet be recognized as a trusted source by