Filter
Top Products
Instruction Manual
41
scanned computers must also be eye mark selected. Scan Rate (<F4>:
More\Scan Rate) sets the display interval when a computer is selected
before selecting the next one.
Manual Scan
Scans through powered computers using keyboard control. Scan Type
(<F4>: More\Scan Type) determines if scanned computers must also
be eye mark selected. Press the up arrow key to select the previous
computer and the down arrow key to select the next computer. Press any
other key to abort the Manual Scan mode.
Scan Type
Ready PC + Eye: In Scan mode, scans through only powered computers
that are eyemarked selected.
Ready PC: In Scan mode, scans through all powered computers. The
non-volatile memory stores the Scan Type setting.
Eye Only: In Scan mode, scans only computers that have been eye-
marked.
Scan Rate
Sets the duration of a computer displayed in Auto Scan mode. The op-
tions are 3 seconds, 8 seconds, 15 seconds and 30 seconds. The Scan
Rate setting is stored in non-volatile memory.
Hotkey Menu
When you hit the left <CTRL> key twice within two seconds, the Hotkey
Menu appears displaying a list of hot-key commands if the option is On.
The Hotkey Menu can be turned Off, if you prefer not to see it when the
left <CTRL> key is hit twice. The non-volatile memory stores the Hotkey
Menu setting.
CH Display
Auto Off: After you select a computer, the channel address and name
of the computer will appear on the screen for 3 seconds then disappear
automatically.
Always On: The channel address and name of a selected computer
and/or OSD status displayed on the screen all the time. The non-volatile
memory stores the CH Display setting.
Position