Filter
Top Products
INSTALLING THE VTL VALUE APPLIANCE IN AN EQUIPMENT RACK
316196101 • A Chapter 1 Installing VTL Value hardware 9
3. Insert the oval-shaped neck of a temporary installation pin (E below) into the oval-
shaped hole in rear mounting bracket of the outer slide-rail (
F), and turn the pin
clockwise 90 degrees, so that the pin locks into place in the 3 o’clock position.
Temporary installation pins are packed in a plastic bag, with the slide-rail hardware.
4. Standing at the front of the rack, position the rail and bracket (
G below) so that you can
draw the temporary installation pin (
H) into the mounting hole in the rear rack post (J).
F
E
G
H
J