Filter
Top Products
Cartridge Management Tasks
96116 • Revision: KA Chapter 3 SL500 Automated Library Operations 95
■ Drive
■ Reserved Slots
The following restrictions apply:
■ The destination location can be a drive only if the source is a CAP or reserved slot.
■ For you to move a a cartridge to a drive, the cartridge media type must be
compatible with the drive type.
■ You cannot move a cartridge to a location that is already occupied.
■ Although not strictly enforced, it is recommended that only diagnostic or cleaning
cartridges be moved to reserved slots.
7. In the Destination Location table, specify the library internal address of the
destination location by making the appropriate selections in the following pull-
down menus:
■ Library
■ Module
■ Row
■ Column
The following special selections are available on the pull-down menus:
■ Min—First element type—library, module, row, or column— in the library
■ Max—Last element type—library, module, row, or column— in the library
Caution – If the library is partitioned, make sure to keep the cartridge in the same
partition it is currently allocated to. Moving a cartridge to a cell allocated to a different
partition could result in a host treating the cartridge as scratch and overwriting the
data. Moving the cartridge to an unallocated cell will result in the cartridge being
inaccessible to all hosts.