Filter
Top Products
General Library Operation Tasks
314 SL500 User’s Guide • July 2008 Revision: KA • 96116
▼ Return the Library to Ready Status
To return the library to ready status:
1. Make sure cartridges are inserted correctly in the storage cells or tape drives and that
they do not block the path of the X table assembly.
2. Close the door and lock it by turning the key counterclockwise; put the key in a safe
place.
3. Make sure the power switch are set to the ON position (1).
4. Check the status display of the SL Console to make sure the library goes to Ready
Status when initialization and audit are complete.
5. Enter the system command to place all tape drives online.
6. When all tape drives are online, enter the command to place the library online.