Filter
Top Products
SDLT/DLT-S4 Cartridges
358 SL500 User’s Guide • July 2008 Revision: KA • 96116
Write-Protect Switch
You can set the write-protect switch so the cartridge is write-enabled. Slide the switch
to reveal the orange indicator to write-enable the tapes. In this position, the tape drive
can write as well as read data. This setting is recommended when inserting cartridges
into the tape library.
You can set the write-protect switch so that the cartridge is read-only (nothing can be
written on the tape). Slide the switch to reveal the “closed lock” symbol. In this
position, the tape drive can only read data from the tape, but cannot write data to it.
Note – See Quantum documentation regarding the write-protect/write enable setting
for DLTtape S4 tapes.
3. SDLT 320/600 diagnostic label
Note: DLT-S4 diagnostic cartridge labels are “DG + 4.”
4. SDLT 320/600 cleaning label
Note: You may use SDLT “CLN + S” cleaning labels for DLT-S4 drives.
FIGURE B-8 Set the SDLT Write-Protect Switch
1. Write-protect switch (data cartridge has orange indicator)
2. Write-protected position
3. Write-enabled position
FIGURE B-7 SDLT Cartridge Labels
L204_566
1
3
2