Filter
Top Products
Partition Design and Commit Screens
216 SL500 User’s Guide • July 2008 Revision: KA • 96116
Note – This procedure verifies only one partition at a time. If you need to verify
multiple partitions, you must repeat this procedure separately for each partition.
Note – This verification is performed on the current partition configuration in the
SL Console partition workspace only. It does not verify current partition boundaries
against the library controller database; therefore it cannot identify configuration
conflicts that may arise due to other users performing cartridge movements or library
configuration changes—through the command line interface, other SL Console sessions,
or host applications—at the same time you have made partition changes.
Refresh
Click to refresh the SL Console partition workspace with current data from the
library controller database. All uncommitted partition changes you have made
during this SL Console login session will be discarded. The Partition Refresh popup
appears, prompting you to confirm the refresh.
? (Help)
Click to display online help for the screen.
See Also
■ Partitions—Summary (Step 2)
■ Partitions—Design (Step 3)—Verify Results
■ Partitions—Commit (Step 4)
■ Partitions—Reports