Filter
Top Products
Cartridge Handling Tasks
96116 • Revision: KA Chapter 9 Manual Operations 325
▼ Remove a Cartridge from a Tape Drive
To manually remove a cartridge from a tape drive:
1. Obtain the tape drive number from the server console.
2. Open the door and locate the appropriate tape drive.
Caution – Possible data loss. Failure to perform the next step could result in data loss.
3. Press the Unload button on the tape drive and wait approximately 12 seconds until
the operation completes.
FIGURE 9-3 Remove a Cartridge from an LTO Tape Drive
4. Gently pull the cartridge from the tape drive.
5. Store the cartridge in an empty storage cell or outside the library.
FIGURE 9-4 Remove a Cartridge from an SDLT Tape Drive
1. SDLT Unload Button
L204
_
007
IBM HP
L204
_
573
SDLT
1