Symbol Technologies P D T 8 1 0 0 S E R I E S Credit Card Machine User Manual


 
8
PDT 8100 Series
with Intel XScale
Technology
Charging the Battery
Charging the Main Battery and Memory Backup Battery for
the First Time
Before using your terminal for the first time, charge the lithium-ion battery
in the terminal for a minimum of 12 hours, with the terminal off. Charge the
battery using the Serial/Charging Cable or the appropriate cradle (1950
mAh battery only). This is the time needed to fully charge the main battery
and the internal backup battery in a terminal that is off.
Recharging the Main Battery
To recharge the 1950 mAh lithium-ion battery in the terminal, turn the
terminal off and charge the battery for approximately four hours using the
Serial/Charging Cable or the appropriate cradle.
To recharge the optional 3000 mAh lithium-ion battery in the terminal, turn
the terminal off and charge the battery for approximately six hours using
only the Serial/Charging Cable.
Note: The battery can also be recharged separately in the CRD
8100-1100S Single Slot Charging Cradle (1950 mAh battery
only), VCD 8100-R001 Vehicle Charging Cradle (1950 mAh
battery only), or UBC battery adapter (1950 mAh and 3000
mAh battery).
Charging the Battery Using a Cradle
(1950 mAh battery only)
You can charge the battery in the terminal using the CRD 8100-4000C
Four Slot Charge Cradle, CRD 8100-1000M Single Slot Modem Cradle,
VCD 8100-R001 Vehicle Charging Cradle, CRD 8100-1100S Single Slot
Charging Cradle, or CRD 8100-4000E Four Slot Ethernet Cradle. For
more information, see the set up instructions in the respective Quick
Reference Guides.