Symbol Technologies P D T 8 1 0 0 S E R I E S Credit Card Machine User Manual


 
29
Quick Reference
Terminal doesn’t
recognize my
handwriting.
Character strokes
written incorrectly
with the stylus.
If you’re using the Block Recogniz-
er input method, characters must
be written a certain way. See the
PDT 8100 Series with Intel XS-
cale
TM
Technology Product Refer-
ence Guide for information about
how to write character strokes.
Character strokes
written on the
wrong part of the
LCD screen.
If you’re using the Block Recogniz-
er or Letter Recognizer input meth-
od, make the character strokes in
the lower character entry area on
the screen — not on the display
part of the screen.
Lower- case and
upper-case let-
ters, and numbers
written on the
wrong parts of the
LCD screen.
Ensure you are writing letters and
numbers in the appropriate section
of the writing area.
Tapping the
screen buttons or
icons does not
activate the cor-
responding fea-
ture.
LCD screen not
aligned correctly.
Align the screen. Choose Screen/
Align Screen from the System tab
under Start/Settings, or hold down
the Function button and press the
Action button.
The system is
hung.
Soft reset the system. To perform a
soft reset, see Resetting Your Ter-
minal on page 24.
Problem Cause Solution