Filter
Top Products
30
PDT 8100 Series
with Intel XScale
Technology
A message ap-
pears stating that
your terminal
memory is full.
Too many files
stored on the ter-
minal.
Delete unused memos and
records. You can save these
records on your computer.
Too many applica-
tions installed on
the terminal.
If you have installed additional ap-
plications on your terminal, remove
them to recover memory. Select
Start, then Settings, and select
the System tab. Tap Remove Pro-
grams, select the unused program
and tap Remove.
Beamed data
does not trans-
mit.
Terminals too
close together.
Confirm that the terminals are 5”
apart, and there is a clear path be-
tween the two devices.
Insufficient room
lighting.
Adjust the room lighting or move to
a different location.
When receiving
beamed data an
out of memory
message ap-
pears.
Not enough free
memory available
for receiving data.
Your terminal requires at least
twice the amount of memory avail-
able as the data you are receiving.
For example, if you are receiving a
30K application, you must have at
least 60K free.
Problem Cause Solution