Filter
Top Products
SysKonnect SK-98xx V2.0 Gigabit Ethernet Adapter
Windows 19
Windows 98 Second Edition
SysKonnect offers an NDIS 5.0 32-bit Miniport driver for the SysKonnect SK-98xx family supporting
Windows 98 Second Edition (Windows 98 SE). This driver does not support Windows NT 4.0 or be-
low, Windows 2000, and Windows XP.
With PCI adapters, due to the plug & play facility of PCI, Windows 98 SE is able to find, identify, and
configure an adapter automatically.
To install the driver, proceed as follows:
1. After you have installed the adapter in your computer, boot Windows 98 SE (for details see
chapter 2 "Installation of the Network Adapter").
Windows 98 SE detects the SysKonnect SK-98xx V2.0 Gigabit Ethernet adapter as “PCI Ether-
net Controller” during the boot operation.
The window “Add New Hardware Wizard” is displayed.
2. Click N
EXT.
The menu “What do you want Windows to do?” is displayed.
3. Select the check box S
EARCH FOR THE BEST DRIVER FOR YOUR DEVICE (RECOMMENDED).
4. Click N
EXT.
5. Select the source (CD-ROM, floppy disk, hard disk) from which the driver is to be installed.
6. Type the path to the driver, e.g.
e:\SK-982x\Windows\Win98SE, where ”e” is the designa-
tion of the CD-ROM drive on your system.
7. Click N
EXT.
The window “Location of driver” is displayed.
8. Click N
EXT.
The menu “Windows has finished installing the software that your new hardware device
requires” is displayed.
9. Click F
INISH.
10. Restart your system.
For more information, refer to the corresponding readme file.
Windows Millennium Edition
SysKonnect offers an NDIS 5.0 32-bit Miniport driver for the SysKonnect SK-98xx family supporting
Windows Millennium Edition (Windows Me). This driver does not support Windows NT 4.0 or below,
Windows 2000, and Windows XP.
With PCI adapters, due to the plug & play facility of PCI, Windows Me is able to find, identify, and
configure an adapter automatically.
To install the driver, proceed as follows:
1. After you have installed the adapter in your computer, boot Windows Me (for details, see chap-
ter 2 "Installation of the Network Adapter").
Windows Me detects the SysKonnect SK-98xx V2.0 Gigabit Ethernet Adapter as “PCI Ethernet
Controller” during the boot operation.
2. Select the check box S
PECIFY THE LOCATION OF THE DRIVER (ADVANCED).
3. Click N
EXT.
4. Select the check box SEARCH FOR THE BEST DRIVER FOR YOUR DEVICE (RECOMMENDED).
5. Select the source from which the driver is to be installed, e.g. R
EMOVABLE MEDIA (Floppy, CD-
ROM).