Filter
Top Products
40 5 Features
The “SysKonnect Network Control” is started from the Control Panel window: START > SETTINGS >
C
ONTROL PANEL > SYSKONNECT NETWORK CONTROL.
The various tabs contain trees showing the currently installed adapters and their configuration:
• The “Adapter” tab displays the network adapters available in your system with their correspond-
ing ports. It shows the ports, which have been configured as VLANs, for RLMT and those,
which have been aggregated into a team.
This tab only serves as an overview. For configuration of the adapter, select one of the other
tabs.
• The “Virtual LAN” tab lists all configured virtual LANs along with the corresponding ports and
the ports, which may be bound by VLANs.
In this tab, the user can add, remove, and configure VLANs and set VLAN specific parameters.
• The “Team” tab shows all links or ports which may be aggregated in a team or have already
been aggregated to form a team.
In this tab, the user can add, remove, rename, and configure teams.
• The “RLMT” tab offers the possibility to configure dual link adapters for Redundant Link Man-
agement Technology (RLMT). RLMT monitors the status of both ports. If the link of the active
port fails, RLMT automatically switches to the standby link and the connection is maintained.
In this tab, the user can add and remove RLMT to/from the ports and set RLMT specific param-
eters.
•The “Protocol” tab shows all entities (port, VLAN, RLMT, Team) and the protocols, which have
been bound to these entities.
• The “Power Management” tab shows the current power management settings of all installed
adapters.
• The “Statistics” tab lists statistic values, e.g. Transmit Packet OK (XMIT OK), etc.
• The “Sensors” tab shows the values of the voltage and temperature sensors.
• The “Specifications” tab lists fixed values during operating time, e.g. Hardware Revision, Soft-
ware version, Max. Frame Size, etc.
• The tab "VCT“ (Virtual Cable Tester™) offers the possibility to examine the quality and charac-
teristics of the attached cables. The VCT technology is only available for SysKonnect SK-9821
V2.0 Adapters.
• The “Support” tab provides information on how to reach the SysKonnect Technical Support.