Filter
Top Products
SysKonnect SK-98xx V2.0 Gigabit Ethernet Adapter
Novell NetWare 33
9. Type the path to the driver.
If you are installing from CD-ROM, the menu “Select an action” is displayed. Here, select C
ON-
TINUE AND ACCESS THE CD-ROM.
The menu “Select a driver to install”
is displayed.
10. Select the driver for your network adapter.
The message “
Do you want to copy driver <driver name>.LAN?” is displayed.
11. To copy the driver to the server, select Y
ES.
If an older version of a SysKonnect driver is installed on the system, the messages “
Save
existing file SYS:SYSTEM\<driver name.LAN?
” and “Save existing file
SYS:SYSTEM\<driver name>.LDI?
” are displayed.
12. To continue, select the desired options (Y
ES or NO).
The menu “Board SK-98NW_1 (Driver <driver name>) Actions”
is displayed.
13. Select S
ELECT MODIFY DRIVER PARAMETERS/PROTOCOLS.
14. Configure the protocols to be used.
15. Configure the parameters, e.g. “slot number”.
16. After the parameters have been configured, select S
AVE PARAMETERS AND LOAD DRIVER.
The driver is loaded.
Once the driver has been installed, the adapter parameters or bindings can be changed in the
autoexec.nfc file using the “Install” tool.
For more information, refer to the corresponding readme file.
Installation on Novell NetWare 5 and 6
The installation procedure for NetWare 5 and 6 is identical.
To install the network driver on Novell NetWare 5 or 6, proceed as follows:
1. After you have installed the adapter in your computer, boot NetWare 5 or 6 (for details, see
chapter 2 "Installation of the Network Adapter").
NetWare detects the new adapter and tries to install a driver.
2. To get a list of available drivers, press <Enter>.
The menu “Select a driver” is displayed.
3. To install an unlisted driver, press <Insert> (the SysKonnect driver is not listed).
4. To specify the path to the driver, press <F3>.
The window “Specify a directory path” is displayed.
5. Type the path to the driver.
If you are installing from CD-ROM, the menu “Select an action” is displayed. Here, select C
ON-
TINUE AND ACCESS THE CD-ROM.
The menu “Select a driver to install” is displayed.
6. Select the driver for your network adapter.
The message “
Do you want to copy driver <driver name>.LAN?” is displayed.
7. To copy the driver to the server, select Y
ES.
If an older version of a SysKonnect driver is installed on the system, the messages “
Save
existing file SYS:SYSTEM\<driver name.LAN?
” and “Save existing file
SYS:SYSTEM\<driver name>.LDI?
” are displayed.
8. To continue, select the desired options (Y
ES or NO).
The menu “Board SK-98NW_1 (Driver <driver name>) Actions” is displayed.
9. Select S
ELECT MODIFY DRIVER PARAMETERS/PROTOCOLS.
10. Configure the protocols to be used.
11. Configure the parameters, e.g. “slot number”.