Filter
Top Products
D14637.01—MARCH 2010
32
TANDBERG Quick Set C20/C20 Plus and Profiles using C20
Administrator guide
Contents Introduction Advanced configuration Password protection About monitors Appendices Contact us
www.tandberg.com
Setting the codec administrator password
To define the administrator password on the codec:
1. Connect to the codec through the network or the serial data
port, using a command line interface (ssh, telnet or scp)
2. Log in to the codec with user name (admin) and no password.
3. Run the following API command and enter a password:
xCommand SystemUnit AdminPassword Set
Password: “****”
4. The password format is a string with 0–255 characters.
5. Reboot the codec.
Password protection of the web interface
The web interface is password protected with the same user
name and password as defined for the codec.
NOTE! To activate the administrator password on the web
interface, after having defined or changed the administrator
password, a reboot of the codec is required. Without a reboot
the administrator password will only apply when you log in to the
codec.
Log in to the codec or the web interface
• You can log in to the codec with the user name and password,
either from a web interface or from a command line interface.
You will need to enter both the user name and password.
• The user name is admin, and cannot be changed.
How to deactivate the administrator password
1. Connect to the codec through the network, using a command
line interface (ssh, telnet or scp).
2. Login to the codec with the required user name (admin) and
password.
3. Run the following API command with a blank password:
xCommand SystemUnit AdminPassword Set
Password: ““
4. Reboot the codec.
Password protection
The system can be password protected in three ways:
• The Advanced menu can be password protected with a menu
password.
• The Codec can be password protected with an administrator
password.
• The Web interface is password protected with the same
administrator password as for the codec. NOTE! Requires a
reboot of the codec.
NOTE! When a new password has been defined make sure
you save a copy of the password in a safe place. Contact your
TANDBERG representative if you have forgotten the password.
Setting the menu password
To define a password for the Advanced menus:
1. In the on-screen menu, go to Home > Settings > Advanced
> Set menu password.
2. The password is a string with 0–255 characters.
3. Enter the new password in the Set password menu
4. Press Save.
Log in to the Advanced menu
When a password is set, the password is required to get access
to the Advanced menu on screen.
How to change the menu password
1. To change the password, go to Home > Settings >
Advanced > Set menu password.
2. Enter the new password in the Set password menu
3. Press Save.
How to deactivate the menu password
1. To deactivate the password, go to Home > Settings >
Advanced > Set menu password.
2. Leave the input field empty in the Set password menu.
3. Press Save to save the blank password. This will deactivate
the menu password.
Contact us
Contents
Introduction
Advanced configuration
Password protection
About monitors
Appendices
Password protection