Filter
Top Products
TANDBERG MPS API
User Guide
36
<BaudRate item="1">2400</BaudRate>
</SerialPort>
</Configuration>
xpreferences xmlstatusfeedback <on/off>
If xmlstatusfeedback is set to on, all status feedback will be returned in XML-format instead of
the standard XACLI status format.
Example 2.26
XACLI-format:
*s Call 1 (status=Synced, type=Vtlph, protocol=H323,
direction=Outgoing):
Channels 1 (type=Incoming):
Rate: 736
Audio (status=Active):
Protocol: G722_1
Rate: 32
*s/end
XML-format:
<Status>
<Call item="1" status="Synced" type="Vtlph" protocol="H323"
direction="Outgoing">
<Channels item="1" type="Incoming">
<Rate item="1">768</Rate>
<Audio item="1" status="Active">
<Protocol item="1">G722</Protocol>
<Rate item="1">64</Rate>
</Audio>
</Channels>
</Call>
</Status>
xpreferences xmlcommandresult <on/off>
If xmlcommandresult is set to on, response for commands will be returned in XML-format.
Example 2.27
XACLI-format:
xcom dial 10.47.15.127
*r Result (status=OK):
CallRef: 1
LogTag: 8
*r/end
XML-format:
xcom dial 10.47.15.127
<Result item="1" status="OK">
<CallRef item="1">1</CallRef>
<LogTag item="1">8</LogTag>
</Result>