TANDBERG D13639 Network Card User Manual


 
TANDBERG MPS API
User Guide
52
EntryExitTones: <On/Off>
LegacyLevel: <0..15>
TelephoneFilter: <On/Off>
FloorToFull: <On/Off>
BandwidthThreshold:
<64/128/192/256/320/384/512/768/1152/1472/1920>
WebCallListTimeout: <On/Off>
PhoneIndication: <On/Off>
SpeakerIndication: <On/Off>
VideoText: <On/Off/Auto>
VideoTextTimeout: <0..30>
ChairControl: <On/Off>
LectureMode: <On/Off>
NetErrorHandling: <IPLR/FURBlock/None>
IPLRRobustMode: <Auto/On>
FURBlockSites: <Auto/On>
FURFilterInterval: <0..60>
VoiceSwitchTimeout: <1..10>
FarTlphEchoSupression: <Off/Normal/High>
OptimalVideoQuality: <On/Off>
EncoderSelectionPolicy:
<BestBitRate/BestVideoStandard/BestResolution>
BandwidthManagement: <Manual/Auto>
WebSnapshots: <On/Off>
OK Result parameters:
None
ERROR Result parameters:
Cause: <1…> Cause code specifying why the command was not
accepted by the system
Description Textual description of the cause code.
Example:
xcommand conferencemodify conference:1 agc:on floortofull:on
*r Result (status=OK):
*r/end
OK
ConferenceRedefine
Command used to modify conference settings for a started conference
with no active calls.
Parameters:
Conference(r): <1..35>
Name: <S: 0, 30>
CallRate:
<1xh221/2xh221/64/128/192/256/320/384/H0/512/768/1152/1472/15
36/1920/Tlph>
Restrict: <On/Off>
Password: <S: 0, 8>
PasswordOnOutgoingCalls: <On/Off>
Encryption: <On/Off>
EncryptionType: <DES/AES-128/Auto>
SecondaryRate: <On/Off>
WelcomeMessage: <On/Off>
DuoVideo: <On/Off>