Filter
Top Products
TANDBERG MPS API
User Guide
50
• Cause: <1…> Cause code specifying why the command was not
accepted by the system
• Description Textual description of the cause code.
Example:
xcommand callmute call:2 mode:on
*r Result (status=OK):
*r/end
OK
CallMuteOutgoing
Command used to mute outgoing audio from a specific call.
Parameters:
• Call(r): <1..128> Reference to the call to be muted or unmuted.
• Mode(r): <On/Off> Denotes whether the call is to be muted or
unmuted.
OK Result parameters:
None
ERROR Result parameters:
• Cause: <1…> Cause code specifying why the command was not
accepted by the system
• Description Textual description of the cause code.
Example:
xcommand CallMuteOutgoing call:2 mode:on
*r Result (status=OK):
*r/end
OK
CallTransfer
Command used to transfer the H.323 party of a Gateway call to another
H.323 party.
Parameters:
• GatewayCall(r): <1..80
• Number(r): <S: 0, 60>
ERROR Result parameters:
• Cause: <1…> Cause code specifying why the call was not accepted
by the system
• Description Textual description of the cause code.
CallTransferToDirEntry
Command used to transfer the H.323 party of a Gateway call to a H.323
directory entry in the local phone book.
Parameters:
• GatewayCall(r): <1..80>
• DirectoryEntry(r): <1..99>
ERROR Result parameters:
• Cause: <1…> Cause code specifying why the call was not accepted
by the system
• Description Textual description of the cause code.