Filter
Top Products
TANDBERG MPS API
User Guide
49
4.1 command.xml – xcommand
Boot
Command used to reboot the system.
Parameters:
None
OK Result parameters:
None
ERROR Result parameters:
• Cause: <1…> Cause code specifying why the command was not
accepted by the system
• Description Textual description of the cause code.
Example:
xcommand boot
*r Result (status=OK):
*r/end
OK
CallFURBlock
Command used to block Fast updates to a call
Parameters:
• Call(r): <1..176>
• Value(r): <On/Off>
OK Result parameters:
None
ERROR Result parameters:
• Cause: <1…> Cause code specifying why the command was not
accepted by the system
• Description Textual description of the cause code.
CallMoveToQCIF
Command used to move a call to QCIF
Parameters:
• Call(r): <1..108>
OK Result parameters:
None
ERROR Result parameters:
• Cause: <1…> Cause code specifying why the command was not
accepted by the system
• Description Textual description of the cause code.
CallMute
Command used to mute incoming audio from a specific call.
Parameters:
• Call(r): <1..128> Reference to the call to be muted or unmuted.
• Mode(r): <On/Off> Denotes whether the call is to be muted or
unmuted.
OK Result parameters:
None
ERROR Result parameters: