TANDBERG D13639 Network Card User Manual


 
TANDBERG MPS API
User Guide
53
AudioG728: <On/Off>
CascadingPreference: <Auto/Master/Slave>
BillingCode: <S: 0, 16>
CPAutoSwitch: <0..60>
NetworkId: <1..32>
ConferenceSelfview: <On/Off>
Protect: <On/Off>
TemplateReference: <1..10>
HDEnabled: <On/Off>
OK Result parameters:
None
ERROR Result parameters:
Cause: <1…> Cause code specifying why the command was not
accepted by the system
Description Textual description of the cause code.
Example:
xcommand conferenceredifine conference:1 duovideo:on
restrict:on
*r Result (status=OK):
*r/end
OK
ConferenceStart
Command used to start a new conference.
Parameters:
Conference(r): <1..35>
Name: <S: 0, 30>
CallRate:
<1xh221/2xh221/64/128/192/256/320/384/H0/512/768/1152/1472/15
36/1920/Tlph>
Restrict: <On/Off>
Password: <S: 0, 8>
PasswordOnOutgoingCalls: <On/Off>
Encryption: <On/Off>
EncryptionType: <DES/AES-128/Auto>
SecondaryRate: <On/Off>
WelcomeMessage: <On/Off>
DuoVideo: <On/Off>
AudioG728: <On/Off>
CascadingPreference: <Auto/Master/Slave>
BillingCode: <S: 0, 16>
CPAutoSwitch: <0..60>
NetworkId: <1..32>
ConferenceSelfview: <On/Off>
Protect: <On/Off>
TemplateReference: <1..10>
HDEnabled: <On/Off>onference(r): <1..12>
OK Result parameters:
None
ERROR Result parameters:
Cause: <1…> Cause code specifying why the command was not
accepted by the system