TANDBERG MPS API
User Guide
51
CallMuteVideo
Command used to mute incoming video from a specific call.
Parameters:
• Call(r): <1..128> Reference to the call to be muted or unmuted.
• Mode(r): <On/Off> Denotes whether video is to be muted or
unmuted.
OK Result parameters:
None
ERROR Result parameters:
• Cause: <1…> Cause code specifying why the command was not
accepted by the system
• Description Textual description of the cause code.
Example:
xcommand callmutevideo call:2 mode:on
*r Result (status=OK):
*r/end
OK
ConferenceDisconnect
Command used to disconnect all calls in a conference.
Parameters:
• Conference(r): <1..12>
OK Result parameters:
None
ERROR Result parameters:
• Cause: <1…> Cause code specifying why the command was not
accepted by the system
• Description Textual description of the cause code.
Example:
xcommmand conferencedisconnect conference:1
*r Result (status=OK):
*r/end
OK
ConferenceModify
Command used to modify conference settings.
Parameters:
• Conference(r): <1..35>
• PictureMode:
<Auto/VS/2Split/3Split/4Split/4+3Split/5+1Split/7+1Split/8+2SplitTopB
ottom/8+2SplitBottomTop/8+2SplitTop/8+2SplitBottom/9Split/12+1Spl
itCenter/12+1SplitTopLeft/12+2Split/16Split/30+2Split/2+1SplitWide/3
SplitWide/3+1SplitWide/4SplitWide/4+1SplitWide/6SplitWide/8+1Split
Wide/12SplitWide/CPAuto>
• VideoFormat: <Auto/Motion/Sharpness>
• CustomFormats: <On/Off>
• AGC: <On/Off>
• AllowIncomingCalls: <On/Off>
• Duration: <0..999>
• MaxAudioSites: <0..16>
• MaxVideoSites: <0..160>