Filter
Top Products
14
TANDBERG Videoconferencing SystemInstallation
THE CAMERA SHOULD BE ALIGNED WITH THE FRONT EDGE OF THE MONITOR TO ENSURE THAT THE IR-SENSOR IN THE CAMERA CAN PICK UP SIGNALS
FROM THE REMOTE CONTROL.
• Place the top plate on top of the cabinet and secure it.
• Place the monitor on the top plate.
• Take the camera and remove the plastic backing from the double sided tape-pads on the base of the unit. Place
the camera centrally, on top of the monitor close to the front. If the system has two monitors, place the camera
on the left monitor (where menus and incoming picture will be displayed).
NOTE