Filter
Top Products
TANDBERG Videoconferencing System
15
Installation
Connecting cables
All cables needed in standard configuration are
connected to the codec. Connect these cables to the
other parts of the system:
1. Power cable
Connect the system power cable and monitor power
cable to an electrical distribution socket.
2. Monitor cables
Connect the S-video cable to the input on your monitor
(see drawing). For Scart-monitors, use the Scart-
adapter. Only a video cable is needed since the
Natural Audio Module amplifies the audio.
3. Microphone cable
Connect the microphone cables to the microphones.
4. Camera cable
Connect the camera cable from the S-Video output on
the camera to the S-Video input ‘Main Cam’ on the
codec. Connect also the control cable between the RJ-
45 on the camera, and the Dataport 1 on the codec.
1
6
5
2
3
4