Filter
Top Products
TANDBERG Videoconferencing System
69
Advanced use
Address
The IP-address of the PC with the VNC software installed. To find the IP-address of the PC, select ‘Command
Prompt’ from the Startup-menu. Type ‘ipconfig’ and press ENTER.
Display Number
The display number for VNC is 0 and upwards. If you are using WinVNC, double-click on the icon on the toolbar
to view ‘WinVNC properties’. This number should correspond with ‘Display Number’ in this menu.
Password
Enter the same password as specified in WinVNC properties. The password will be shown as asterisk signs (*)
the next time you enter the menu.
Start using VNC
To activate VNC, press ‘PC’ on the remote control. Please make sure that ‘PC’ is set to ‘VNC’ in the ‘Video
Settings Menu’. See also ‘PC SoftPresenter’ section for further information.
VNC Settings*
VNC SERVER SOFTWARE SETUP
• BOTH THE PC AND THE VIDEOCONFERENCING SYSTEM
MUST
BE CONNECTED TO THE SAME LAN.
• A VNC
SERVER MUST BE INSTALLED ON THE PC. FREE
SOFTWARE
CAN BE DOWNLOADED FROM HTTP://
WWW.UK.RESEARCH.ATT.COM/VNC
• INSTALL THE SOFTWARE BY RUNNING THE DOWNLOADED
FILE
.
• T
O CONFIGURE THE VNC SERVER SOFTWARE :
• S
ELECT “ACCEPT SOCKET CONNECTIONS”.
• S
ELECT “AUTO” FOR “DISPLAY NUMBER”. ‘DISPLAY
NUMBER’ IN THE SYSTEM MUST THEN HAVE THE VALUE
0.
• ENTER A PASSWORD IN THE “PASSWORD”-FIELD. MUST
CORRESPOND
WITH THE ‘VNC SETTINGS’ ON YOUR
SYSTEM.
NOTE
* - Requires option ‘Presenter’. To check which options are installed, see the ‘System Info’ menu in ‘Diagnostics’.